PORSCHE 996 CARRERA WING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Stoptech big brake kit rear slotted black caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$2,694.60
Make a selection
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,126.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$3,126.60
Make a selection
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,882.60
Make a selection
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Gruppe m ram air intake system Porsche 964 Carrera 88-93
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped ...(choose a part on the right to read more)
General Fitment 911 1987-89
$2,175.08
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,021.93
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1989-94
$4,635.63
Make a selection
Product details:
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-increases horsepower and torque by 8 whp and 16 ft-lbs
-saves 21 lbs from the rear of the vehicle
-dramatically reduces backpressure and improves exhaust flow and sports car sound
-includes fabspeed's deluxe quad-style tips available in polished or black chrome. Please indicate your year when ordering.
-direct replacement for the factory mufflers; compatible with the factory OEM cats or fabspeed’s sportcat or cat bypass ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,895.00
Make a selection
Product details:
High-flowing, direct bolt-on replacement for the bulky & restrictive factory catalytic converters, gaskets included.
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-constructed from high quality mandrel bent t304 stainless steel
-less back pressure and improved throttle response
-high flow sport race cat for maximum flow and power
-includes integrated o2 sensor bung for fuel-injected cars
-direct replacement bolt-on for stock cat or cat bypass pipe
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: fabspeed’s 200-cell high-flow catalytic...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
From $595.00
Make a selection
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. The included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. Lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Features:
Saves 11.45 lbs. / 5.2 kg
Dramatic improvement in sports car sound and power throughout the rpm range
Constructed from high-quality 14-16 gauge c.n.c. Mandrel bent t304l st...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,421.85
Make a selection
Product details:
Replaces blower motor assembly and ductwork while allowing plenty of heat; replicated from factory rs part
Features:
-fits all 964 Carrera vehicles (1989-1994)
-saves 8 lbs from rear of vehicle
-replica of the Porsche rs lightweight factory heat duct
-factory Porsche part is roto-formed plastic with parting lines where as the fabspeed rs heater pipe is genuine carbon fiber.
-replaces blower motor assembly/ductwork and still allows heat in the cabin.
-improves aesthetic value with clear coated carbon fiber tube.
-easy 20 minute diy install
-all fabspeed performance products are backed by the fabspeed lifetime limited warra...(choose a part on the right to read more)
General Fitment 911 1989-94
Product details:
Complete high-performance exhaust & intake solution for the 996 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips.
Fabspeed’s 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed’s carbon fiber competition intake sys...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,795.00
Make a selection
Fabspeed's 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motorsport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Includes:
Maxflo performance mufflers
General Fitment 911 1998-05
$8,839.13
Make a selection
Hailing from the baden wurttemberg region in Germany, speaking the language and dealing with lead engineers from the OEM and motor sport manufacturers for more than 30+ years has many advantages. Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and factory motorsports parts that have been developed to work together without compromise. We not only cycle test these kits, we install them on our street cars to test them in the real world. They offer a silky smooth release, superb drivability and can handle more torque (430 ft/lbs. / 560 nm max.) compared to the kits that are "off the shelf" recommendations from OEM suppliers. These kits are perfec...(choose a part on the right to read more)
General Fitment 911 1970-73
From $1,578.04
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 997 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips. Fabspeed’s 997 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air ...(choose a part on the right to read more)
General Fitment 911 2005-08
$7,795.00
Make a selection
Quicker acceleration.
Kit contains the following part:
Pressure plate, rigid organic disc, release bearing, grease.
Fits: Carrera 4s, 3.8l, 283kw (09-), Carrera 4, 3.6l, 254kw (09-), Carrera s, Carrera
General Fitment 911 2009-12
$1,321.44
Make a selection
For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,042.80
Make a selection
Get a more aggressive look to your Porsche 996 Carrera coupe by adding this precision Porsche 997 GT3 rear wing to your vehicle. This complete decklid and spoiler is a copy of the 997 GT3 designed to fit your 996 Carrera. The spoiler improves downforce just like the GT3 while giving you added style. Since these spoilers replace your factory decklid and speed controlled rear spoiler, you will need to deactivate this function with a Porsche piwis or durametric tool. The decklid and spoiler comes unpainted and is shipped oversized freight
General Fitment 911 1998-05
$2,018.25
Make a selection
For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Rear diffuser for all Porsche 997.1 Carrera models. The mounting is very easy. Plug & play with 3M double tape and 2 screws on the screwing points. Not for models with the turbo | GT2 | GT3 rear bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,312.30
Make a selection
997 GT3 rear spoiler fits all 997 (not turbo)
Includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass.
Also available with wing blade in kevlar / carbon FVD 512 997 GT3 rs2
Tech tip:
Facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 997 631 052 01 separately.
The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable.
The air inlet of the rear is not included. Please order 99751262591g2x
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 2009-12 911 2005-08
From $3,174.70
Make a selection
If you find your Porsche 996 Carrera rear end is a little plain, then you might want to consider adding one of these precision Porsche GT3 style rear spoilers. A direct copy of the original GT3 spoiler, this composite fiberglass part gives you the same aerodynamic advantage of the GT3s downforce. It is a full replacement of your decklid and hydraulic speed actuated rear spoiler. To ensure you have no warning light on your dash, you will have to buy the GT3 spoiler wiring harness or deactivate it using a Porsche piwis or durametric tool. The GT3 style wing comes unpainted. They are a direct fit to your factory hinges and retain your intake snorkel as well as engine fan. This complete decklid and spoiler ships vi...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,748.25
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|